Chris
From California
February 17th, 2004
I had heard of Golden Eagle Bike Engines
online while researching different methods
of motorizing a bike, and after talking to
Dennis I decided to give em a try. I have
seen the pics of other satisfied customers
on their website, and I decided to do something
different with my bike, something with an
edge that will stand out in a crowd, turn
some heads and get this company some attention.
While most of the people mounted the engine
on a 10 speed mountain bike style platform,
I decided to mount the engine on a Dyno Roadster
stretched beach cruiser that I dubbed "
Hardley Davidson." To add to the effect I went all out
with accessories: 18" ape hangar bars,
thick motorcycle chain, custom sprocket,
pedals, saddle. The bike I ended up with
is just SICK! But I couldn't stop there;
I then turned my attention to the engine
and getting it to perform to absolute capacity.
First I started with an aftermarket air filter,
next I bolted on a high performance carb,
and fully ported and polished the intake/exhaust/
and transfers, finally I ended up putting
the x-can, a high performance exhaust on.
All in all I GPS'ed my speed on five different
runs on flat ground with medium wind and
the average speed was 34.8 M.P.H. I weigh
220Lbs and my bike HAS to weigh in at over
60 Lbs! Now for a 25.4cc engine that is pretty
impressive. Now on to the customer service
aspect of Golden Eagle, Dennis is the man!!
Any problem you have he can help fix, if
you have a question, he has an answer. The
staff at Golden Eagle is reason enough to
purchase this kit. I am FULLY satisfied with
their product, and their service, and I will
do everything in my power to back Golden
Eagle as if it were my company. See you around,
gotta go turn some heads.
Chris
in Fountain Valley, California
|
| "After having your Golden Eagle, would you
try a friction drive, Chris?" |
Back to reviews
|
